• Overview – The Linn Kolektor Preamp is a versatile, pitch-accurate stereo preamplifier and system controller from Scottish manufacturer Linn, built with high-precision solid-state switching and a patented silent switch-mode power supply for minimal signal degradation.
• Key Technology – High-density surface mount circuitry keeps signal paths minimal and discrete, while ten line inputs (including a low-noise MM phono stage) and four line outputs, including tape, are managed by microprocessor control with independent per-source settings.
• Performance – Owners describe the Kolektor as a highly competent, efficient preamp that remains difficult to fault sonically today, though its phono stage is considered modest relative to Linn’s own turntable heritage.
• Specs – The Linn Kolektor Preamp offers ten line inputs (including a moving-magnet phono input at 47kΩ/68pF, other line inputs at 50kΩ) and four line outputs. Maximum input level: 2.5V rms. Nominal input levels: 2Vrms (line), 2.5mVrms (phono, MM). Line output impedance: 300Ω. Power consumption: 8W maximum. Mains tolerance: ±10% with no performance change. Includes tone controls, full-feature remote control, and an internal headphone amplifier.
• Dimensions – Measures approximately 320mm (W) × 325mm (D) × 80mm (H), available in Black or Silver finishes.
•
• Overview – The Linn LK85 Power Amp is a stereo power amplifier from Scottish manufacturer Linn, engineered for pitch-accurate sound with advanced control features, upgradability, and compatibility with Linn’s wider active and multi-room amplifier systems.
• Key Technology – Four sets of speaker outputs support optimised bi-wiring and tri-wiring, and two or three LK85 units can be combined to bi-amp or tri-amp a loudspeaker system, each unit driving a separate frequency band.
•
• Performance – With a frequency response extending to 70kHz and a low output offset of less than 5mV, the LK85 delivers Linn’s characteristic pitch-accurate, controlled sound in a compact, self-configuring package for active playback systems.
• Specs – The Linn LK85 Power Amp delivers 62W per channel into 8Ω, rising to 85W per channel into 4Ω (230Vac mains). Input signal for maximum output: 685mV rms. Maximum output voltage: 18.5V rms. Gain: x27 (28.6dB). Input impedance: 10kΩ. Frequency response: -3dB, 10Hz–70kHz. Output offset: less than 5mV. Signal sense threshold: greater than 150μV rms. Standby power consumption: less than 5W. Maximum power consumption: 350W.
• Dimensions – Measures approximately 320mm (W) × 325mm (D) × 80mm (H), matching the compact half-width footprint of Linn’s Kolektor preamplifier and other LK-series components.